Hey people, i have just been clocking my computer hard today and i was wondering whats the best that people have pulled outa there machine.

This is my best out my AMD Athlon Thunderbird 1.4 - 158fsb x 10 multi. With the DDR RAM CAS @ 2.5.
The motherboard is a Soltek SL-75DRV5
The RAM is Kingmax pc2700 DDR. (333mhz)

and my video card (ASUS V7700 TI Deluxe. Standard - Core 250 ram 400 Overlocked - Core 290 RAM 505

http://www.agz.com.au/community/Morgish/FSB.JPG

Sif

tbird 1.33 @ 1400 (10x140)
duron 800 @ 952 (8x119)
cele 466 @ 595 (7x85)

squarky, dont like to push them hard do ya ?

I have overclocked my athlon 1gig to 1200 before with a wbk38 6800rpm fan and a desktop fan hehe thats it.

Athlon 1ghz @ 1.5ghz

oh dear didnt think they where so big ;(***

Was running my Duron 850 @ 935 (110fsb) @ 1.75v perfectly stable for a about a week. It can go up to 1.85volts, so there's plenty of potential there. I'll push it harder when I get a new video card.

hhaa, not bad. Why didnt you compeat with a P4 2 GIG ? because mine also beats all that you showed but only comes close to the 2 gig.

haha amd ;)

Hahahah

Pathetic :P

Tbird 1000 @ 1400 (10x140) 1.85v

Palomino 1600 (1.4ghz) @ 2100 (1.67ghz) 1.9v

exis owned you all!

becuase the version of sisoft i had at the time didnt include p4 2ghz chips

how did he own us ?
mines 1ghz @ 1.5ghz 10x150fsb

morgish, i like to keep my chips, i dont wanna kill any of them, and notice all of them were fsb pushes.

exis, congrats, you almost killed your chip, spose dad can buy u another one tho

I'm surprised existence didnt ask for help with overclocking it. Or did he?

Someone search the forum history, quick!

The funny thing is, Existence is running a palimno core, wich means he can do over 170 fsb easily.
i would still like to see how it compares with my cpu on sis soft.

http://www.agz.com.au/community/Morgish/sissoft/1.JPG
http://www.agz.com.au/community/Morgish/sissoft/2.JPG
http://www.agz.com.au/community/Morgish/sissoft/3.JPG

Its okay existence, im getting a XP in 1-2 weeeks, then we will see buddy :) mauah

celeron 300@450
celeron2 566@850

l337!

http://www.half-assed.net/images/techtips/cpuid.jpg

lol skrybe. When i get home from work and cbf retracing the l1's ill show you my 1ghz doin 9x170 :D

i got my atlon xp 1800

1.533GHz @ 1.7GHz

On a serious note...

I wanna know how people manage to get their setups running with an FSB of 170. Hell I can't even get mine past 140 without lockups :(

athlon 1.2 @ 1324 mhz

ran a bit hot for my liking so u clocked it back, but im getting a few bigger fans for my case which should cool things down a bit

I have an XP1700+ (1.4gig ??), I decided to overclock it just for this thread... It is at about 1.6gig. If I go any higher Win2k blue screens on boot-up.

slot a athlon 750 @ 874 @ 1.75v running at a cool 48deg!

not very stable tho.

anyone know where i can get that wcpuid prog from?

anyone know a link or can tell me a retard proof way to overclock my p4 2 ghz?

btw im not doing it for performance, just want to try it out and see how to do it

p3 800EB @ 900 (150 fsb * 6)

edit: thats 100% stable...it can go higher but my video card doesn't like it too much.

for those of you who were asking.. exis-tard sold his 1600+ and bought another one.. he didn't unlock it himself.. he didn't oc it himself.. he just bought it..

ook.. that may not even be right..
let me rephrase : "his mummy and daddy just bought it"

fine now? :)

(oh and nathan - MAD PROPS on the new ausforum code.. the layout is easier to read and it loads about 2x faster on my 56k)

Sif overclocking

/me hugs p3

as if not
/me hugs athlon 1.2 gig haha

Rodolphe : Athlon XP aye, u wont get any blue screens from 160 onwards.
clock that bitch higher, more like 170. :)

And for who ever asked how people are getting such high fsb's. You need to know a fair bit about ram timing etc for a high stable result. You also need to change voltages etc.

KEEP UP THE OVERCLOCKING!
i would like to see some more video card results.

my duron 750 runs at a stable 1000

7.5 x 133

can go to 1100 but windows doesn't like it

ah the wank factor zone!

model name : Celeron (Coppermine)
stepping : 3
cpu MHz : 708.030

its overclocked i forget by how much though...
it used to be llamas so its his good work :)

llammas haha, u know its a $2 one when its from llamma

haha Rodolphe what a cain0r!

I can get the memory higher but I get funky colours happening in wolf, like the gun models go all psychedelic etc but it looks fine in ordinary stuff. I can also get the engine higher but I start to get artifacts on my screen for everything and they get worse and worse until my PC locks up. I have been running those settings for a few months now I think.

I will have to have a bash at wolf tomorow to see how my CPU likes to be overclocked under full stress, I have no real interest in going faster though, the rest of my PC is what needs to be better :o)

i underclocked my 1.2gig Athlon to 1gig cause i couldn't notice any f***ing difference in speed.

also my dong is larger than all of you.

P3 700 @ 1015 Stable (I run it all the time) with a FOP38

Athlon 600 @ 600

I've never had a chip that was easily overclockable (my chips needs that Goldfinger thing and I cbf)....but my TNT2 Ultra gets a beating now and then :)

llamas cele was going good at 870 for a while..
then i decided i wanted to know the tempereature, so i had ro recompile the kernel

i should of realised it was unstable when make dep segfaulted

however i continued and...

Mar 22 19:29:32 tuxwall kernel: CPU 0: Machine Check Exception: 0000000000000004
Mar 22 19:29:32 tuxwall kernel: Bank 1: b200000000000115

T'Bird 1G @ 1.3

i go harder but i keep going and going and get sick of doing that jumper thing resetting bios

:D

I overclocked the wife one night with a few champaynes and she went off like a rocket.

Does this count?

:)

/me gives THIS to Morgish ...

Do you mean clock the system bus higher ?? That is what I have been doing... The system bus is at 145, when I go to 150 is when it gets unstable... I dun know that much about overclocking etc so I wouldn't know what else to do.

Also the overclocking I have done has only added about 2 degress to my CPU temp.

Also by just upping the system bus I am basically just flogginh RAN etc harder right ?? Cos I only have PC133 RAM.

Athlon 1ghz @ 1ghz, be f***ed if im going to fry ANOTHER cpu.

pilsudski: Why do i need a cluepon mate ? beacuse i got the highest fsb outa all that have been listed ? or because i did a thread that has gotten over 3 pages of good replies. You need the cluepon mate.

Rodolphe : yeah dude, your right, the ram is pushed to the same fsb of your cpu.

So it would be fair to say that the blue screens are a result of my RAM but the CPU can definately go harder ??

clock it till it pops!
http://www.twistedhardware.net/ or just break it!

Celeron 633@1000.

Standard HSF.

just goto www.overclockers.com.au you gimps

omg man im morgish i think im an overclocking know it all. MY FSB IS TEH HIGHEST I AM WIN!.

OK, Im reading your first post and you say your fsb is 148 - whoopdef***ingdo.

on closer inspection of your picture it says 158 - learn to type.

still a big whoopdef***ingdo to you, and that you should take this s*** to ocau.

btw - keke roffels @ exitence have to buy a cpu thats been unlocked for him.

leave it to morgish to start a penis measuring comp

and to not actually measure his penis but to measure other things to make his penis look bigger then it is.

Why do i need a cluepon mate ? beacuse i got the highest fsb outa all that have been listed ? or because i did a thread that has gotten over 3 pages of good replies. You need the cluepon mate.

its like you just pulled you little weenie out of your pants, oh dear its only 4 inches but if i pull really hard i can make 5 1/2 inches!!!

now i tied it to my mums car and shes driving off lets see how long it goes now! *RIIP* oh no i broked my weenie off!

bam you just fried your CPU
thats my hella dodge overclocking analogy :P heheh

Nice analogy Rubba

got my p3 667 to 875 with a fsb of 174.. 5x Multiplier.
on an asus cusl2 board... awesome board..

all default now.

and to not actually measure his penis but to measure other things to make his penis look bigger then it is.

hahahahahahhahaha soo true

Oh dear... its the "I can pull my dick from 6 inches to 12 inches if I try hard enough!"

Oh dear... its the "I can pull my dick from 6 inches to 12 inches if I try hard enough!"

more like 6mm to 12mm

do you guys even know how much an inch is?

do you guys even know how much an inch is?

yes its like apx 2.5cm or something

I overclocked a p200 to 225 a long time ago...
Sif you guys know about speed... :P

c0rr and acrylic, you are just the fagets that ruin pots. If you dont like overclocking then dont do it and dont come into this thread. everyone else is doing a good job of listing there reports and having a good convo about it. just grow up allready. not everything is tha way u say it.

f*** up morgish, im just voicing my opinion and its my right to, so dont go telling me i cant pots (post) in your gay thread

and going by the above posts (pots) me and c0rr arnt the only ones that feel this way about "overclocking"

also
http://members.optushome.com.au/acrylicj0r/photoshops/clue/getclue2.jpg

also - inspired by icewyrm.

morgish, when the f*** did we say you could talk.

750@757!!!!!!!!!!!!!!

gooooooo 101FSB!

jarded ams teh man!

i overclocked my cheese burger to extra cheese but then i had to underclock it as i romoved the pickle :(

do u want fries with that ?

i overclocked my pc to one googleplex front side bus

man it went fast
i could calculate 1 + 1 like a bijjilion times faster than any of your pcs


i swear why not get it over and done with morgish and start a how big is your dick thread
because thats what this is

My dick must be small then :o(

Rodolphe : haha must be.
Dilbert : what the f*** are you on about c***? u are just tring to be cool or something ? this is not waht the thread is about.

My best:

Duron 600 @ 893 (8.5*105) at 1.85v - factory unlocked - used that for about 3 months, 100% stable, using a modded Alpha PEP66.

Celeron 633 @ 1064 (9.5*112) default voltage, 100% stable, using standard HSF, sold that to kAiGE after a week.

Now I use a Thunderbird 1GHz @ 1066 (8x133), using Globalwin FOP38 solid as a rock and fast enough.

You need a cluepon becasue you dont know what you are talking about at all

AND I have beaten you with my FSB overclock (210fsb) so that argument is invalid as well not that i give a s*** either about it

So you need the cluepon

pilsudski your still a faget for posting that link that closed all your windows

/me looks at acrylics sig

my highest was two at once ;)

pilsudski : Your reports are s***ty for 210fsb aye, what ram were u using and motherboard ? what kinda cooling too ?

what the f*** are you on about c***? u are just tring to be cool or something ?

woooah bring out the genital words!!! you're cool now that you abuse people!!

210? sif

http://eviscerator.ausgamers.com/images/160fsb.jpg

that's a t-bird 1.2 btw

bleh

hey eviserator, i got 160 to post but windows had a spew. what voltage are u using ? and the 1.2 can overclock a lot higher than my 1.4 :(.

I thought you were talking about FSB overclocking ...

HERE are benches done at 174fsb

show me ur friggin wcpuid u wanger not those crappy benchmarks

Hmm psulidki

What ram are you using?

I havent got a wpcpouid screenshot but ill get it next time i restart, it was done with 9 x 174mhz = 1566mhz

Using Kingmax pc2400 256mb stick.

alrighty then, but what cpu ?

its a 1700xp . A very unoverclockable cpu as well. Thinking of selling it and getting a new one.

pilsudski : u still say u can get 210fsb, u wouldhave to have uber cooling for it, and u also said u were runnign ya ram at half your fsb speed. Now thats bulls***. i think your whole 210fsb is bulls***. answer some more questions ya gimp

200 would be the highest u can go morgish u tard...

but on a xp cpu a 174fsb would be warrantable but I would still like to see a screeny of his wcpuid "score"

I unlocked my cpu of course. Its pretty hard to get it going without unlocking.

pilsudski : there is no f***ing way u got 210 fsb, u dont even know what u are talking about. you are jsut stating the ovious that some newbie has probably told you about overclocking. I have the latest amd motherboard that has been realeased and its option only goes upto 200fsb.
Not that i think even a xp could so easily.

Now, What motherboard was it. What ram, How did u get ya ram to run at half your fsb speed. What cas was it ? 2.5 or 2 ? Cpu voltages etc.

hey pilsudski: u live at the gold coast do ya ? hrmm. where abouts? i would love to come and learn oh how u got this fsb.

ive got hte 8kha+ and I had a beta bios that allowed selection up to 210fsb. Dont say that I dont know what I am talking about because youre the one that doesnt have a clue.

I live around the helensvale area (north)

OH NO, MORGISH's PENIS ISNT THE BIGGEST- NUKE THE THREAD HURRY!

did you have some beasty cooling pilsudski or what?

http://wwww.agz.com.au/community/Morgish/Pics/map27218.gif

I live in Labrador, how old are you ?

and what voltage was it and what cas ram ?

http://odt.austribes.com/forum/images/smilies/extra/gives.gif

bahahah boba, thats a good sig.

boba wins

http://eviscerator.ausgamers.com/images/cpu3.jpg

I was bored ok... eat it morgish :D

phwaor EvisceratoR,
nice work man. What ram u using and video card, motherboard voltage etc ?

try to fnd out what agp / pci bus thats running it at!
you might get more performance from 166 fsb because of the agp rate, unless u have like a gf3 - gf4 because of the agp bandwith

how do I find that out ?

ram: kingmax pc2700 256meg
vid card: gainward gf2 gts
mobo: kr7a-raid

bah cbf editing... and that's only with the cpu voltage being put up to 1.85V